YieldChecker home

Guide · Updated October 2026

How many townhouses can I build on my block?

A plain-English guide for Melbourne buyers, owners and small developers. It covers how many townhouses, units or dual occupancy homes a block can fit, what decides the number, and how to tell whether the site stacks up.

The short answer

01Zone and height

Your zone sets the ground rules. Most townhouse sites are in the Neighbourhood Residential Zone (NRZ), with a default limit of 9 m and 2 storeys, or the General Residential Zone (GRZ), with 11 m and 3 storeys. The Residential Growth Zone (RGZ) and Housing Choice and Transport Zone (HCTZ) allow more height and have no garden area requirement, which can lift the yield considerably. Council schedules can change these defaults, so check the schedule number for your site.

02Garden area

In the NRZ and GRZ, a minimum share of the lot must be garden area:

400–500 m²
25% of the lot
500–650 m²
30% of the lot
Over 650 m²
35% of the lot

Driveways, garages, roofed areas and most paving don't count. On a long, narrow block, the shared driveway alone can take 15–20% of the site, which is why garden area so often decides whether you get three homes or four.

03The Townhouse and Low-Rise Code

Clause 55 of every Victorian planning scheme, now the Townhouse and Low-Rise Code, sets the standards a design must meet: street and side setbacks, site coverage (typically 60% in the NRZ and 65% in the GRZ), permeable surfaces, canopy trees, overshadowing and overlooking of neighbours, and at least 25 m² of private open space per home (or a suitable balcony or roof terrace). Meeting every standard is what keeps an application simple, and it's also what qualifies for the faster approval pathways.

04Driveways and parking

Each home needs its car parking (Clause 52.06), and every car has to get in and out. Four or more spaces off one driveway generally need room to leave in a forward direction. Where the crossover can go matters too: street trees, power poles and pits can block it, and frontages under about 15 m make it hard to fit a driveway beside the homes.

05Trees, easements and overlays

These are the things that most often surprise buyers:

06Dual occupancy, units or townhouses?

A dual occupancy is two homes on one lot, either side by side or one behind the other. Units usually means single-storey homes in a row behind each other, popular with downsizers. Townhouses are usually two or three storeys, each on its own small lot. The same planning rules apply to all three. What changes is how much floor area you get, what each home sells for, and therefore what the land is worth to you.

07The 10-day fast track

Since October 2025, two homes on a lot that meet every standard can be assessed through VicSmart in 10 business days, without advertising. In September 2026 the Victorian Government announced the same pathway for up to four homes on a lot, from October 2026. Until it is formally in the planning scheme, treat it as likely rather than certain, and plan for the standard process (often 6–12 months) as a fallback.

08Does it stack up?

Developers work backwards. Start with what the finished homes will sell for, then take off GST, building costs, design and permit fees, finance, selling costs and a margin (we use 15% on cost). What's left is the most you can pay for the land.

A quick filter before you go further: land per home should be no more than about 20% of what each finished home will sell for. If it's well above that, the site probably won't work at today's build costs, however many homes fit.

?Questions

How many townhouses can I build on my block?
It depends on the zone, the block size and shape, the garden area requirement, setbacks, parking, trees and overlays. As a rough guide in Melbourne's General and Neighbourhood Residential zones, blocks of about 500–650 m² often fit 2–3 homes, 650–800 m² often 3–4, and 800–1,000 m² often 4–6. Every site is different, so a site-specific assessment is the only reliable answer.
What is the garden area requirement?
In the Neighbourhood and General Residential zones, lots of 400–500 m² need at least 25% garden area, 500–650 m² need 30%, and lots over 650 m² need 35%. Driveways, roofed areas and garages don't count, so it often limits the number of homes more than anything else.
What is the difference between a dual occupancy, units and townhouses?
A dual occupancy is two homes on one lot. Units usually means single-storey homes, often one behind the other. Townhouses are usually two or three storeys, side by side or in a row, each on its own small lot. The same planning rules (Clause 55, the Townhouse and Low-Rise Code) apply to all of them.
Can a townhouse development be approved in 10 days?
Two homes on a lot that meet every standard can already use the 10-business-day VicSmart pathway. In September 2026 the Victorian Government announced the same fast track for up to four homes on a lot from October 2026. Check that it is formally in the planning scheme before relying on it.
How do I know if a development site will make money?
Work backwards from what the finished homes will sell for. Take off GST, build costs, fees, finance, selling costs and a margin (we use 15% on cost). What's left is the most you can pay for the land. A quick filter: land per home should be no more than about 20% of each finished home's value.

Want a straight answer for your block?

A YieldChecker Yield Study tells you how many homes fit, with a concept layout and every planning control checked, in 1 business day from $825 inc GST. A Full Feasibility adds the numbers: build costs, sale prices, margin and what to pay for the land.

Send us the address →  ·  See sample reports  ·  Instagram @yieldchecker

General information only, based on Victorian planning provisions as at October 2026. Not planning, legal or financial advice. Controls vary by council and site; confirm them for your property before you buy.