Guide · Updated October 2026
A plain-English guide for Melbourne buyers, owners and small developers. It covers how many townhouses, units or dual occupancy homes a block can fit, what decides the number, and how to tell whether the site stacks up.
Your zone sets the ground rules. Most townhouse sites are in the Neighbourhood Residential Zone (NRZ), with a default limit of 9 m and 2 storeys, or the General Residential Zone (GRZ), with 11 m and 3 storeys. The Residential Growth Zone (RGZ) and Housing Choice and Transport Zone (HCTZ) allow more height and have no garden area requirement, which can lift the yield considerably. Council schedules can change these defaults, so check the schedule number for your site.
In the NRZ and GRZ, a minimum share of the lot must be garden area:
Driveways, garages, roofed areas and most paving don't count. On a long, narrow block, the shared driveway alone can take 15–20% of the site, which is why garden area so often decides whether you get three homes or four.
Clause 55 of every Victorian planning scheme, now the Townhouse and Low-Rise Code, sets the standards a design must meet: street and side setbacks, site coverage (typically 60% in the NRZ and 65% in the GRZ), permeable surfaces, canopy trees, overshadowing and overlooking of neighbours, and at least 25 m² of private open space per home (or a suitable balcony or roof terrace). Meeting every standard is what keeps an application simple, and it's also what qualifies for the faster approval pathways.
Each home needs its car parking (Clause 52.06), and every car has to get in and out. Four or more spaces off one driveway generally need room to leave in a forward direction. Where the crossover can go matters too: street trees, power poles and pits can block it, and frontages under about 15 m make it hard to fit a driveway beside the homes.
These are the things that most often surprise buyers:
A dual occupancy is two homes on one lot, either side by side or one behind the other. Units usually means single-storey homes in a row behind each other, popular with downsizers. Townhouses are usually two or three storeys, each on its own small lot. The same planning rules apply to all three. What changes is how much floor area you get, what each home sells for, and therefore what the land is worth to you.
Since October 2025, two homes on a lot that meet every standard can be assessed through VicSmart in 10 business days, without advertising. In September 2026 the Victorian Government announced the same pathway for up to four homes on a lot, from October 2026. Until it is formally in the planning scheme, treat it as likely rather than certain, and plan for the standard process (often 6–12 months) as a fallback.
Developers work backwards. Start with what the finished homes will sell for, then take off GST, building costs, design and permit fees, finance, selling costs and a margin (we use 15% on cost). What's left is the most you can pay for the land.
A quick filter before you go further: land per home should be no more than about 20% of what each finished home will sell for. If it's well above that, the site probably won't work at today's build costs, however many homes fit.
A YieldChecker Yield Study tells you how many homes fit, with a concept layout and every planning control checked, in 1 business day from $825 inc GST. A Full Feasibility adds the numbers: build costs, sale prices, margin and what to pay for the land.
Send us the address → · See sample reports · Instagram @yieldchecker
General information only, based on Victorian planning provisions as at October 2026. Not planning, legal or financial advice. Controls vary by council and site; confirm them for your property before you buy.